For a bungalow near the coast 16 Day 4 Energy 245W panels were selected. In addition to the panels being salt mist resistant they also boast excellent shade resistant properties thanks to their unique string connection layout and 9 bypass … Continue reading →

The 16 panel Sanyo 4kWp system is estimated to produce around 3,186 kWh/yr according to the SAP2005 conservative estimate. The array is divided into two strings of 8 panels which feed a SMA Sunny Boy inverter. The owner of the … Continue reading →

An 11kW Nibe Air Source Heat Pump system has been recently installed and commissioned. The heat pump replaces a combi oil fired boiler that feeds radiators and also provides hot water. The heat pump system consists of the outdoor unit, … Continue reading →

A 9.9kWp Solar PV system has been installed on a south-facing barn roof. The system consists of forty-five Sharp 220Wp modules, three SMA Sunny Boy inverters and requires an area of 73.89m². The system qualifies for the >4-10kW Feed-in Tariff … Continue reading →

On a south facing roof 14 x Philadelphia 250Wp panels were fixed in landscape. The panels total 3.5kWp and feed a EnaSolar inverter which has built in wireless capabilities that allow the owner to monitor the performance of the system … Continue reading →

On a south facing roof 6x250Wp Sanyo high efficiency panels were specified to total 1.5kWp. The Sanyo HIT-H250E01 panel is made up of a thin mono crystalline silicon wafer surrounded by ultra-thin amorphous silicon layers. The result is the industry’s … Continue reading →

On a south facing roof 16x230Wp panels were specified to total 3.68kWp. The panels are connected to a SMA Sunny Boy inverter which converts the dc voltage to ac so it can be used in the property and also be … Continue reading →

A 4 panel flat plate collector system with a new 400L vented cylinder was specified in order to provide enough hot water for the property and its paying guests. The solar system is estimated to provide 2125 kWh/yr to the … Continue reading →